Fever check station
I want to build a fever check station on an ESP32 with an MLX90614 IR temperature sensor, a 0.96 inch OLED and a green/red LED.
Parts
ESP32-DEVKITC Development Board In stock
MLX90614 IR Thermometer Module In stock
0.96 inch OLED Display Module 128x64 I2C Yellow/Blue (SSD1306) In stock
5mm LED Assorted Pack (Red, Green, Blue, Yellow, White) In stock
Dupont Jumper Wire Kit (M-M, M-F, F-F, 20cm, 22AWG, ) In stock
USB A to Micro B Cable 1m In stock
120 Resistors 1/4W Carbon Film Assortment Kit In stock
Pins, wiring and code
The pin table, the wiring steps and the code for this build are in Soldr. Start this build on Soldr - you can change it before you buy.