Colour picker
I want to build a colour reader on an ESP32 with a TCS34725 colour sensor and a 0.96 inch OLED that shows the colour name and its RGB values.
Parts
ESP32-DEVKITC Development Board In stock
TCS34725 RGB Color Sensor Module with IR Filter In stock
0.96 inch OLED Display Module 128x64 I2C Yellow/Blue (SSD1306) In stock
Male-to-Male Breadboard Jumper Wires (20 cm, 24 AWG) In stock
USB A to Micro B Cable 1m In stock
Pins, wiring and code
The pin table, the wiring steps and the code for this build are in Soldr. Start this build on Soldr - you can change it before you buy.